No products in the cart.
CABLE TIE MOUNT – MOUNT STUDDING (CTM-2)
Cable tie mounts with studding are made of virgin nylon 6.6 and are suitable for use with CTM-1
£7.56CABLE TIE MOUNT – SCREW FIXING (CTM1)
Designed specifically for holding heavier cable bundles these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fixing and can be used with a wide variety of heavy duty cable ties up to 8.3mm to be used with CTM-2.
£7.56F4000 Flaring Tool Set 4 Piece 1/4” 3/8” 1/2” 5/8” Heads
F4000 Flaring Tool Set 4 Piece 1/4” 3/8” 1/2” 5/8” Heads is designed for the most common tubing diameters in HVAC. The high temperature method preserves the copper’s/aluminium’s malleability while performing the flare, preventing cracks and leaks. The Flaring SPIN Tools are developed and recommended for soft copper.
£93.43S6000 Swaging Tool Set 6 Piece 1/4”3/8”1/2”5/8”3/4”7/8”
S6000 Swaging Tool Set 6 Piece 1/4”3/8”1/2”5/8”3/4”7/8″ is designed for the most common tubing diameters in HVAC, and it’s recommended to both soft and hard copper. The high-temperature method preserves the copper’s/aluminium’s malleability while performing the swage, preventing cracks and leaks.
£120.30GCT-004 Grab Clip for Threaded Rod – 5/8″ & 1-1/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£21.49GCT-003 Grab Clip for Threaded Rod – 1/2″ & 7/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£20.38