-
F4000 Flaring Tool Set 4 Piece 1/4” 3/8” 1/2” 5/8” Heads
F4000 Flaring Tool Set 4 Piece 1/4” 3/8” 1/2” 5/8” Heads is designed for the most common tubing diameters in HVAC. The high temperature method preserves the copper’s/aluminium’s malleability while performing the flare, preventing cracks and leaks. The Flaring SPIN Tools are developed and recommended for soft copper.
£76.94 -
S6000 Swaging Tool Set 6 Piece 1/4”3/8”1/2”5/8”3/4”7/8”
S6000 Swaging Tool Set 6 Piece 1/4”3/8”1/2”5/8”3/4”7/8″ is designed for the most common tubing diameters in HVAC, and it’s recommended to both soft and hard copper. The high-temperature method preserves the copper’s/aluminium’s malleability while performing the swage, preventing cracks and leaks.
£99.07 -
Danfoss (DF-018F6857) DC EVR 2/15 24V D.C
Solenoid coil DC Danfoss (DF-018F6857) DC EVR 2/15 24V D.C
£77.15 -
Solenoid Coil Terminal Danfoss (DF-018F6707) EV 24 VOLT 50Hz
Solenoid Coil Terminal Danfoss (DF-018F6707) EV 24 VOLT 50Hz
£41.79 -
Danfoss (DF-018F6702) EV 240 VOLT 50Hz COIL-TERMINAL
Danfoss (DF-018F6702) EV 240 VOLT 50Hz COIL-TERMINAL
£47.05 -
Danfoss (DF-018F6252) EV 240 VOLT 50Hz COIL-CABLE
Danfoss (DF-018F6252) EV 240 VOLT 50Hz COIL-CABLE
£73.54 -
Sld Adaptor 1/4″ Danfoss (DF-0682062) T2/TE2
Danfoss (DF-068-2062) T2/TE2 Sld Adaptor 1/4″ expansion valves
£11.59 -
Sld Adaptor 3/8″ Danfoss (DF-068-2060) T2/TE2
Sld Adaptor 3/8″ Danfoss (DF-068-2060) T2/TE2
£39.17 -
Danfoss (DF-067B2791) No 3 Orifice – TE5 Valve
Danfoss (DF-067B2791) expansion valve No 3 Orifice – TE5 Valve
£104.89 -
Danfoss (DF-067B2790) No 2 Orifice – TE5 Valve
Expansion Valve Orifice Danfoss (DF-067B2790) No 2 – TE5
£104.89 -
Danfoss (DF-068-2094) T2/TE2 Orifice No 04 FSA – Solder – Green Cap
Orifice No 04 Expansion Valve Danfoss (DF-068-2094) T2/TE2 FSA – Solder – Green Cap
£21.47 -
Danfoss (DF-068-2095) T2/TE2 Orifice No 05 FSA – Solder – Green Cap
Danfoss (DF-068-2095) T2/TE2 Orifice No 05 FSA – Solder – Green Cap
Thermostatic expansion valves regulate the injection of refrigerant liquid into evaporators.
Injection is controlled by the refrigerant superheat.
Therefore the valves are especially suitable for liquid injection in ”dry“ evaporators where the superheat at the evaporator outlet is proportional to the evaporator load.
£36.41
- AC Systems
- AC&R Tools
- Automotive AC
- Condensate Pumps
- Electrical
- Fixings
- Gases & Chemicals
- Hand Tools
- Heat Pumps
- Pipe&Tube
- Refrigeration Parts
- Engineer Essentials
- COOLtube
- Resources
