No products in the cart.
Created in 1979 and located in Essonne, 25 km south of Paris. Siccom is European manufacturer who’s engineering and network expands the globe.
When it started its activities, SICCOM specialized in level and proximity detection, bimetallic thermal protection and condensate removal pumps (evacuation pumps).
Isolator Rotary 4 Pole IP65 – 20 Amp BBJ Large Body
The Weathersafe Rotary Isolator range is manufactured from tough, durable thermoplastic for outdoor switching protection. Designed with safety in mind, the interlocked front covers can only be removed when in OFF position. Lockable switch prevents tampering, set to IP65 standards.
£13.79CABLE TIE MOUNT – MOUNT STUDDING (CTM-2)
Cable tie mounts with studding are made of virgin nylon 6.6 and are suitable for use with CTM-1
£7.56CABLE TIE MOUNT – SCREW FIXING (CTM1)
Designed specifically for holding heavier cable bundles these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fixing and can be used with a wide variety of heavy duty cable ties up to 8.3mm to be used with CTM-2.
£7.56GCT-004 Grab Clip for Threaded Rod – 5/8″ & 1-1/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£21.49GCT-003 Grab Clip for Threaded Rod – 1/2″ & 7/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£20.38GCT-002 Grab Clip for Threaded Rod – 3/8″ & 5/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£19.46GCT-001 Grab Clip for Threaded Rod – 1/4″ & 1/2″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£18.36Cantilever Arm 600mm Kit inc. Struts 750mm & M8 Fixings
Galvanised steel cantilever arm with 14mm diameter holes, for assemble and installation. Used for supporting condensing units on external walls. in a straight length and webbed version in a variety of lengths.
£43.48Cantilever Arm 450mm Kit inc. Struts 750mm & M8 Fixings
Galvanised steel cantilever arms with 14mm diameter holes, for assemble and installation. Used for supporting condensing units on external walls. in a straight length and webbed version in a variety of lengths.
£39.64Condenser Mounting Bracket – 140kg
Professional finish by professional engineers. Designed to suit all brands of air conditioner, ACR brackets support outdoor condensing units mounted on exterior walls. Available in four sizes to mount units up to 140kg. All brackets are tested to twice the rated safe working loads.
£64.71Condenser Mounting Bracket – 90kg
Professional finish by professional engineers. Designed to suit all brands of air conditioner, ACR brackets support outdoor condensing units mounted on exterior walls. Available in four sizes to mount units up to 140kg. All brackets are tested to twice the rated safe working loads.
£58.58Condenser Mounting Bracket – 60kg
Condenser Mounting Bracket – 60kg with Crossbar and built in spirit level
Designed to suit all brands of air conditioner, SBP450 bracket support outdoor condensing units mounted on exterior walls. Available in two sizes to mount units up to 90kg. All brackets are tested to twice the rated safe working loads.
£46.63